quang cao

  Crown XLS2500 Dòng âm ly có âm thanh sống động

Crown XLS2500 Dòng âm ly có âm thanh sống động

Giá : Liên hệ
Mã : Crown XLS2500
Bảo hành : 24 tháng
Hãng : CROWN
Đơn vị : Chiếc

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

The XLS Series of power amplifiers from Crown define the standard for live sound systems with unmatched performance, technology, and affordability.

This high-performance line consists of four models each providing enormous power and flexibility thanks to the integrated DriveCore Technology, PureBand Crossover System and Peakx limiters. And weighing in at only 10 lbs or less, they provide the ultimate in lightweight portability.

Every XLS Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything.

Integrated DriveCore Technology
Class D amplifiers are notable for extraordinarily high efficiency and being well suited for driving difficult reactive loads such as subwoofers. However, their performance can suffer impaired performance on marginal and unstable AC line supplies.

To overcome this obstacle, Crown engineers developed DriveCore Technology - a proprietary hybrid analog-digital integrated circuit (IC) developed with Texas Instruments that drives the "front end" of the Class D output stage. Over 60 years of Crown's design knowledge and experience went into the development of this technology resulting in truly remarkable benefits.

DriveCore Technology provides an extremely wide-tolerance with regards to sagging or "dirty" AC line conditions providing consistent performance without affecting audio quality. This means that your performance will not be compromised by fluctuating generator power or overloading by lighting rigs, backline gear, etc.

In addition, DriveCore Technology's patented feedback and PWM modulation circuits enable fast recovery on peak transients, accurate reproduction of low-level detail, and precise tracking of low-frequencies at high power levels for maximum subwoofer output.

Advanced Switched-Mode Power Supply
This advanced power supply is highly efficient and optimized for maximum power transfer from the AC line through the Class D output stage to the loudspeakers. A benefit to this is substantial weight reduction when compared to older 60Hz transformer-based power supplies. All four models in the line weigh 10 pounds or less with no compromise in performance. This makes the XLS Series the benchmark for high performance lightweight portability.

PureBand Crossover System
The PureBand Crossover System in the XLS Series adds an enormous amount of flexibility and performance to any system. With this system, the crossover frequency is completely variable allowing the choice of any crossover point between 50Hz and 3kHz on 1/12 octave centers. The use of 4th order Linkwitz-Riley filters provides steep slopes for a seamless transition between high and low drivers. And with four crossover modes to choose from providing the ultimate in flexibility, all of your system needs are covered:

  1. Crossover Mode (CH1=LPF, CH2=HPF) - When chosen, this mode enables a LowPass Filter on Channel 1 and a HighPass Filter on Channel 2 at the frequency chosen.
  2. LowPass Mode (CH1=LPF, CH2=LPF) - When chosen, this mode enables a LowPass Filter on both Channel 1 and Channel 1 at the frequency chosen.
  3. HighPass Mode (CH1=HPF, CH2=HPF) - When chosen, this mode enables a HighPass Filter on both Channel 1 and Channel 2 at the frequency chosen.
  4. Bridge Mode (LPF or HPF) - When the amplifier is put into Bridge-Mono, you are still able to use the crossover system and employ either a LowPass Filter or HighPass Filter at the frequency chosen.

All of the PureBand Crossover System settings can be fully configured quickly and easily from the front panel using the intuitive LCD interface.

Peakx limiters
Peakx limiters provide the ultimate in performance and protection for your entire system. This advanced algorithm was specifically developed and tuned to work with this amplifier and power-supply to achieve higher SPL will less audible artifacts. This means less distortion, less shutdowns, and maximum safe power delivered to your speakers. The Peakx limiters can be easily turned on or off by channel right from the front panel eliminating the need to be digging around in the back of the dark rack.


Gửi ý kiến phản hồi

Họ tên
Điện thoại & email
Nội dung
Nhập Từ khóa tìm kiếm
Mr Hùng-KD phân phối, dự án
0988 970 666 - 098 86 86 083
Mr. Quân - KD + KT
096 374 2828
  Quảng Cáo
quang caoquang caoquang caoquang caoquang caoquang caoquang cao
Thời tiết Cà Mau, Việt Nam
     Cà Mau
Thời tiết TP Hồ Chí Minh, Việt Nam
TP Hồ Chí Minh
Thời tiết Huế, Việt Nam
Thời tiết Huế, Việt Nam
Lạng Sơn
Thời tiết Hải phòng
Hà Nội
Đang truy cập
Lượt truy cập

Bản quyền thuộc Công ty Điện tử - Máy tính - Công nghệ số Việt Hưng
Viethung Company for Electronics - Computing - Digital Technology
Địa chỉ: Số 8/486 Đường Xuân Đỉnh (Khu Nhà Văn hóa Cáo Đỉnh) - Hà Nội
Phone: 043 750 2154/37502696 - 098 868 6083; Email 1: viethungepc@gmail.com; Email 2: amthanhviethung@gmail.com