|
Giá : Liên hệ VNĐ
|
|
Giá : Liên hệ VNĐ
|
|
Giá : 9.800.000 VNĐ
|
|
Giá : 600.000 VNĐ
|
|
|
|
|
Loudspeaker Managerment - XTA (ENGLAND) - DP-226
|
|
|
Giá : Liên hệ VNĐ
Mã : Loudspeaker Managerment - XTA (ENGLAND) - DP-226
Bảo hành :
Đơn vị : Cái
|
Loudspeaker Managerment - XTA (ENGLAND) - DP-226 | |
| Model: DP-226 Nhãn hiệu: XTA |
|
|
DP226 Features Superb
audio quality - carefully optimised double precision signal processing
coupled with a 40-bit internal data path ensures a dynamic range in
excess of 110dB. The high sampling rate means minimal filtering
providing exceptional sonic purity.
A flexible 2-input/6-output
multi-mode format caters for any crossover configuration, regardless of
scale. A total of 46 parametric equalisation bands are available, each
providing +15 to -30dB of gain at centre frequencies between 20Hz and
20kHz, with a wide range of Qs available between 0.4 to 128.
All
parameters feature fine resolution with 1/36 octave frequency steps,
0.1dB gain increments, and 100 Q settings. Any parametric section can
also be set to operate as a high or low shelving filter.
|
Each output features
a high performance limiter, provided with complete control over attack,
release and threshold parameters. To aid set-up, the output meters show
headroom to the limiter threshold, and use time constants that track
those of the limiter to display precise power usage.
Each output
features variable high and low pass filters, with a choice of 12, 18 or
24dB/Octave roll-off, and Butterworth, Bessel or Linkwitz-Riley
responses.
Independent control of each high and low pass filter allows asymmetric crossover bands to be created.
Delay of up to 650mS may be independently set for each output, with an exceptionally fine minimum increment of 2.6µS. |
Three velocity-sensitive encoders
provide a familiar and intuitive control format with all filter
information displayed simultaneously on a backlit LCD screen.
The
comprehensive standard specification also includes 40 memories, PC Card
storage and remote control via MIDI, RS232 or RS485 ports, with
multi-part security lock-out.
AES/EBU Digital input and output interfaces are available as an option.
Input and output balancing transformers are also available as an option. |
DP226 Specifications Inputs Two electronically balanced. [++] Impedance >10k ohms. CMRR >65dB 50Hz - 10kHz. Outputs Six electronically balanced. [++] Source Imp < 60ohms. Min. Load 600ohm. Max. Level +20dBm into 600 ohm load.
Frequency Resp. ±0.5dB 20Hz - 20kHz. Dynamic Range >110dB 20Hz -20kHz. unwtd. Distortion < 0.02% @ 1kHz, +18dBm.
Maximum Delay 650 mS. (increment 2.6 l uS Steps) Output gain Adjustable +15dB to -40dB in 0.1 dB steps and mute.
Parametric Equalisation Filters 8 Per input 5 per output. Filter gain +15dB to -30dB in 0.1dB steps. Centre frequency 20Hz - 20kHz, 1/36 octave steps. (368 positions) Filter Q/BW 0.4 to 128/2.5 to 0.008 |
High & Lowpass Filters Filters 1 of each per output. Frequency (HPF) 10Hz - 16kHz, 1/36 octave steps. Frequency (LPF) 60Hz - 22kHz, 1/36 octave steps. Response Bessel / Butterworth 12dB, 18dB and 24dB per octave and Linkwitz-Riley 24dB per octave.
Limiters Threshold +22dBu to -10dBu Attack time 0.3 to 90 milliseconds. Release time 2, 4, 8, 16 or 32 times the attack time.Display 2 x 20 character backlit LCD.
Connectors Inputs 3 pin female XLR. Outputs 3 pin male XLR. RS485 In/Out XLRS RS232 9 Pin (Female) DEE Connector MIDI In / 5 pin DIN. Power 3 pin IEC. |
Power 60VAC - 240VAC. Consumption < 30 watts. Weight 3.5kg. Net (4.8kg. Shipping) Size 1.75"(1U) x 19" x 11.8" (44 x 482 x 300mm) excluding connectors.
Options [++] = Transformers available. AES/EBU Digital I/O; GPI Interface. | |
DP226 Architects Specifications The
digital processor shall provide 2 Inputs and 6 Outputs. Operating modes
shall be provided to allow the unit to function as 2 x 3 way, 1 x 6
way, 2 + 4 way or 5 + 1 way mode with mono sum available.There shall be 5
parametric sections for each output and 8 parametric sections per
input. Each output shall be able to have up to 650 ms of delay in 2.6 us
increments. Limiters shall be provided for each output, with control
over attack, release and threshold parameters.
Headroom shall be
displayed for both inputs, with parameter information shown on an LCD
display. A security lock-out facility shall be included.
The
digital audio processor shall meet or exceed the following
specifications:-Frequency response:- ± 0.5dB 20Hz-20kHz. Dynamic
range:> 110dB 20Hz-20kHZ, unweighted. Parametric filters: Total of 46
digital filter sections. Filter gain: +15dB, -30dB, 0.1dB steps. Centre
frequency: 20Hz-20kHz, 1 /36 octave steps. Filter Q: 0.4 to 128.
Inputs
and Outputs shall be via XLR connectors and be electronically balanced
as standard. The digital audio processor shall be a 1U, 19" rackmount
device capable of operating from a 60 V A C - 240 V A C. 50/60Hz
supply.The digital audio processor shall be the XTA Electronics model
DP226.
|
Overview Building on the phenomenal success
of the DP200, the DP226 continues the reputation for sound quality in a
product aimed squarely at the most demanding applications of the sound
reinforcement, installation and studio market.
The DP226 features
2 inputs and 6 outputs. Both inputs have an 8 band parametric
equaliser, base delay and gain control. All outputs feature crossover
filters, 5 band parametric equaliser, highand low shelving filters,
limiter and delay.
Full metering is provided for inputs and outputs, with mute and access buttons allowing quick set up and gain adjustment.
The DP226 can also be controlled via PC with our popular AudioCore Windows™ control software.
| | | |
|
|
|
|
|
Mr Hùng-KD phân phối, dự án 0988 970 666 - 0944 970 666 ---------------------------------- Mr. Quân - KD + KT 096 374 2828
|
|
|
Cà Mau
TP Hồ Chí Minh
Huế
Lạng Sơn
Hà Nội
|
|
|
Đang truy cập |
|
Lượt truy cập |
|
|
|
|